New AIR Thermapen™
Model #231-214
Measures air temperature
High accuracy to ±0.7°F (±0.4°C)
Water-resistant design (Body only)
°F to °C reconfigurable
Auto on/off—no buttons!
1,500 hour battery life
Includes padded zipper case
Made in England
 Click and hover to zoom. Click again to view larger image.
The Super-Fast™ Thermapen™ has been a favorite among restaurant chains, health inspectors and quality managers worldwide. Hundreds of thousands are in use. The clever fold-away probe and the simple pocket design replace more costly and bulky handheld thermometers while using the same professional thermocouple technology. This new generation Thermapen™ introduces a robust, splash-proof design with molded-in seals to protect the thermometer from wet hands and kitchen splashes.
Get all the great features of the Splash-Proof Thermapen™ in an air measurement. Includes calibration certificate.
No Cables!
The components most likely to fail in a commercial thermometer are the cable and its connector. Also, the typical handheld meter and probe combination requires two hands. What do you do with the cable when you're through with it? The competition want you to wrap it around the meter, which is time consuming and a natural trap for grime and bacteria! The one-handed Thermapen™ eliminates frayed cables, snags, germ traps and wasted time while freeing your second hand.
Simple Operation
Just open the probe and the Thermapen™ comes on. Close it and it shuts off. No buttons or switches to catch germs, confuse staff and cause errors. Configuration settings in the battery compartment allow management to easily set the Thermapen™ for °F or °C, read in tenths or whole degrees (0.1° or 1°), and disable the auto-off for continuous readings till the probe is closed. Although likely to never be needed, a calibration trim button fine-tunes the Thermapen™ calibration at a single temperature such as an ice-bath.
| Range |
-56.2 to 572°F (-49.9 to 299.9°C) |
| Accuracy |
±0.72°F (-58 to 392°F), ±1.8°F (392 to 572°F)
±0.4°C (-49.9 to 199.9°C), ±1°C (200 to 299.9°C) |
| Resolution |
0.1° or 1° - user selectable |
| Sensor |
K thermocouple |
| Operating Range |
-4 to 122°F (-20 to 50°C), (max ambient limits of Thermapen body) |
| Battery |
2 x 3 volt CR2032 lithium coin cell |
| Battery Life |
1,500 hours |
| Auto-Off |
10 minutes (user reconfigurable to disable auto-off) |
| Display |
0.81 H x 1.88 W inches (20.5 H x 48 W mm) LCD (user-reconfigurable to °F or °C) |
| Size |
6.1 H x 1.85 W x 0.75 D inches (153 H x 47 W x 19 D mm) |
| Weight |
0.21lb. (97g) |
| Calibration |
Includes NIST-Traceable calibration certificate |
 |
Protective Leather Wallet
Model: 830-110-LX
- Real Leather
- Fits with or without boot installed
- Belt Strap
| Real leather. Fits Thermapen (with or without silicone boot) snuggly with snap-down flap and belt strap. Protects Thermapen while stored. |
|
|
 |
Thermapen Boot
Model: THS-830-260
- Protects from drops
- Translucent Silicone
|
Snuggly fitting silicone rubber boot. Protects Thermapen from drops to concrete or hard surfaces. Provides protection from radiant heat. Fits Zipper Wallet, Leather Wallet and wall bracket. Use only for Splash-Proof Thermapen. Does not fit older models. The silicone boot is translucent. Silicone is not clear nor transparent and so when the protective boot is installed the color of your Thermapen will seem muted. |
|
|
 |
Thermapen Magnetic Boot
Model: THS-830-265
- Fits new Splash-Proof model
- Protects from drops
- Translucent Silicone
- Glows in the dark
- Magnetic back
|
Snuggly fitting silicone rubber boot. Provides a magnetic back and glows in the dark! Protects Thermapen from drops to concrete or hard surfaces. Provides protection from radiant heat. Fits Zipper Wallet, Leather Wallet and wall bracket. Use only for Splash-Proof Thermapen. Does not fit older models. The silicone boot is translucent. Silicone is not clear nor transparent and so when the protective boot is installed the color of your Thermapen will seem muted. |
|
|
 |
Wall Mount Bracket
Model: 10203
- Hole for easy mounting
- Mounts close to work area
- Great for busy kitchens
|
Black acrylic wall bracket with wall-mount hole (screw not included). Great for storing Thermapen by grill/oven for daily use. New size fits Thermapen with silicone boot installed. |
|
|
 |
CR2032 Batteries
Model: THS-839-195
|
Package of 2 batteries. Standard CR2032 size. |
|
| Popular Thermapen Accessories |
|
 |
Thermapen Boot
Model: 830-260
Was $8
|
|
|
 |
Thermapen Magnetic Boot
Model: 830-265
Was $11
|
|
|
 |
Wall Mount Bracket
Model: 10203
Was $15
|
|
|
|