Therma K

Model #221-041

Excellent accuracy: ±0.5°F (±0.3°C)
Big, clear digits
°F/°C switchable
One-button simplicity
Interchangeable probes
5-year battery life (10,000 hours)

NIST-Traceable

Meter Only

Meter & Probe Kit - Save $25
Order the kit and get the probe for half price, a $25 savings. Each kit includes the meter and our most popular probe, model 313-158 Fast Response Penetration Probe. No substitutions.

Bookmark and Share

Click and hover to zoom. Click again to view larger image.
Detecting Flash

Designed for food service and processing plants, this affordable meter reads any type K thermocouple. Competing units suffer from hard-to-read digits, poor accuracy, complex operation, cord-wrapping food traps and much higher prices. The slim, easy-to-grip body of our new Therma K is compact and tough enough for commercial kitchens. Accuracy is better than ±0.5°F in food ranges and ±0.7°F over the full range. Each unit includes a calibration certificate with actual test data traceable to National Standards for confidence in your readings. With just one button to press, the Therma K reduces staff training time and errors. Best of all, the price is great!

Range -148 to 2501°F (-100 to 1372°C)
Accuracy ±0.5°F (±0.3°C) from 32 to 212°F (0 to 100°C)
±0.7°F (±0.4°C), ±0.1% full range
Resolution 0.1°
Probe Type K thermocouple, mini socket
Auto Shutoff After 10 min.
Display 1 H x 1.5 W inches (24 H x 38 W mm) LCD
Battery 3 x AAA, minimum 5 years (10,000 hours)
Units °C/°F switchable
Dimensions 5 H x 2.2 W x 1 D inches (128 H x 56 W x 25 D mm)
Weight 4.6 oz. (130 g)
Certificate NIST-Traceable Certificate included

NSF

More Info ImageThe Therma K meter has been tested by NSF and qualifies to bear the mark. NSF applies to the meter only.

 

Optional Type K Thermocouple Probes

  • Hundreds of probes to choose from
  • Penetration, surface, high temp, wire, and more
  • Select coiled or flat cables with optional extended cable lengths
Probe


more info
Select Category to View Probes

probe
General Purpose

probe
High Temp

probe
Penetration


probe
Surface

probe
Wire

probe
Probe Accessories


Mini Handle Fast Response Penetration Probe

Model: x13-158

 

Mini Handle Probe
Fast response reduced tip is ideal for liquids and semi-solids including fish and other delicate foods. 3–4-second response! Max temp 482°F (250°C).

 


Rubber Boot

Rubber Boot

Model: THS-830-253

  • Provides added protection
  • Water resistant to IP63 when installed
  • Easily removed for cleaning
Protects the Therma K from drops, bumps and kitchen splashes. Is easily removed for cleaning. Can be used in conjuction with wall bracket (832-050).


Rubber Boot

Rubber Boot with Probe Holder

Model: THS-830-255

  • Provides added protection
  • Water resistant to IP63 when installed
  • Easily removed for cleaning
  • Retains standard probe when not in use
Same as 830-253 boot but includes rear exterior grooves for retaining standard probes when not in use.


Wall Bracket

Wall Bracket

Model: THS-832-050

  • Stores meter and probe
  • Prevents drops & bumps
  • Keeps unit close to work area
  • Stainless steel
Keeps meter and probe close to work area with handy wall mount hole. Durable SST construction.


Waterproof Pouch

Type K Waterproof Pouch

Model: THS-830-400

  • Provide water protection to meter
  • Fits Therma K, Therma K Plus, TW8060
  • Includes type K probe lead to connect probe
  • IP68 waterproof up to 50 feet (15m)
  • Usable up to 248°F (120°C)
Add water protection to your type K meter with our waterproof pouch. Fits our Therma K, Therma K-Plus, or TW8060. Type K lead is sealed from water ingress so a probe can be connected while meter is kept dry inside pouch.


Hard Case

Light Duty Storage Case

Model: 10210

  • Customized soft foam
  • Dual Latches
  • Fits meter & probes
  • Light-duty
Stores meter and probes. Custom soft foam protects from drops & bumps. Lots of room for probes and spare batteries. Two latches keep lid closed in transit.
Interior dimensions: 12.75 x 9.25 x 2.625 in.

Limited Time Price


Batteries

Duracell Procell AAA Batteries

Model: PC2400

  • AAA battery - 4-pack
  • 7-year freshness guarantee
  • Reliable operation in temperature extremes
  • Contains no added mercury
Package of 4 Duracell AAA Procell batteries. Manufactured to rigid specifications to meet some of the highest standards of durability and longevity that professional users demand and expect. Delivers outstanding performance with a 7-year freshness guarantee backed up with date coding. Rated for reliable operation in temperature extremes from -4 to 129°F (-20 to 54°C).


Cal Cert

Temperature Log Book

Model: TLOG1

  • 6" x 9", 36 pages
  • Meets HACCP requirements
  • Includes calibration log
Quick and easy way to keep temperature records. Records date, time, item or location, temperature, comments or actions, and initials. Tips and reference temperatures are provided as well as simple instructions to check a thermometer's calibration.

Probes

Mini Handle Fast Response Penetration Probe

Model: 113-158/313-158

ThermoWorks Image

This handheld probe with a 1/8" shaft and reduced 1/16" (1.5mm) needle tip gives you the exact same high speed probe stem as the Thermapen uses. It's the perfect combination of speed and durability. You get 3 second food or liquid readings. The reduced tip makes a small hole and is perfect for meats and general purpose kitchen use.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable (PVC): 14 to 221°F (-10 to 105°C)
Time Constant
: 0.6 seconds typical in liquid. 3-4 seconds full reading.
Accuracy
: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


Mini Handle Penetration Probe

Model: 113-162/313-162

ThermoWorks Image
This general purpose probe is popular in the food industries and is a little more rugged than the Fast Response Probe. The 1/8" diameter shaft is swaged to a smaller diameter and given a very sharp tip for easy penetration in most semi-solids.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable (PVC): 14 to 221°F (-10 to 105°C)
Time Constant
: 0.6 seconds typical in liquid. 3-4 seconds full reading.
Accuracy
: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


Mini Handle Needle Probe

Model: 113-101/313-101

ThermoWorks Image
Great for fast measurements in foods, plastics, rubbers, etc… The 4" shaft is 1/16" all the way to the needle tip providing a small mass and fast response. Great for fish or other delicate foods.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable (PVC): 14 to 221°F (-10 to 105°C)
Time Constant
: Less than 0.4 second typical in liquid. Less than 2 seconds full reading.
Accuracy
: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


Fast Response Penetration Probe

Model: 103-159/303-159

ThermoWorks Image
This handheld probe with a 1/8" shaft and reduced 1/16" (1.5mm) needle tip gives you the exact same high speed probe stem as the Thermapen uses. It's the perfect combination of speed and durability. You get 3 second food or liquid readings. The reduced tip makes a small hole and is perfect for meats and general purpose kitchen use.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable (PVC): 14 to 221°F (-10 to 105°C)
Time Constant
: 0.6 seconds typical in liquid. 3-4 seconds full reading.
Accuracy
: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


5" Penetration Probe

Model: 103-160/303-160

ThermoWorks Image
This general purpose probe is popular in the food industries and is a little more rugged than the Fast Response Probe. The 1/8" diameter shaft is swaged to a smaller diameter and given a very sharp tip for easy penetration in most semi-solids. Probes are available in a 5" stem or a longer 12" stem, which is great for reaching over hot grills, into large ovens, rotisseries or deep pots; also suitable for liquids and air temperatures. It's very durable probe resists bending and breaking (for frozen foods consider heavier duty probes) and is recommended for hard daily use. Fairly quick response time takes only about 7 seconds to a complete reading.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable: 14 to 221°F (-10 to 105°C)
Time Constant: Less than 2 seconds typical in liquid. Less than 10 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


5" Needle Probe

Model: 103-100/303-100

ThermoWorks Image
Great for fast measurements in foods, plastics, rubbers, etc… The 5" shaft is 1/16" all the way to the needle tip providing a small mass and fast response. Great for fish or other delicate foods.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable: 14 to 221°F (-10 to 105°C)
Time Constant: Less than 0.4 second typical in liquid. Less than 2 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


Precision Surface Probe

Model: 103-030/303-030

ThermoWorks Image
This is the fastest and most accurate handheld surface probe we've seen. Readings generally take less than 5 seconds! The sensor is made from flat-spring ribbons of thermocouple material. Very popular in equipment servicing applications and in the plastics and packaging industries.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable: 14 to 221°F (-10 to 105°C)
Time Constant: Less than 0.5 seconds typical in liquid. Less than 2.5 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart

From


Ribbon Surface Probe

Model: 103-044/303-044

ThermoWorks Image
Features a 0.32" diameter cylindrical head with a stainless steel ribbon. The thermocouple sensor is welded to the back of the ribbon.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable: 14 to 221°F (-10 to 105°C)
Time Constant: Less than 0.5 seconds typical in liquid. Less than 2.5 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


5" High Temp Handheld Probe

Model: 103-212/303-212

ThermoWorks Image
A popular general purpose probe that will withstand a very wide temperature range. The shaft is mineral-insulated stainless steel that can be bent without adversely affecting performance. Use this probe for liquids and hot air or gases.
Sensor Range: -58 to 2012°F (-50 to 1100°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable: 14 to 221°F (-10 to 105°C)
Time Constant: Less than 2 seconds typical in liquid. Less than 10 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


Air or Gas Probe

Model: 103-300/303-300

ThermoWorks Image
The stainless steel shaft is open ended with a ventilation hole provided in the sides to expose the bare thermocouple sensor to the outside for faster measurements of air or gases. Ideal for environmental readings, cold storage or HVAC work.
Sensor Range: -58 to 482°F (-50 to 250°C)
Handle (ABS blend): Max temp 221°F (105°C)
Cable: 14 to 221°F (-10 to 105°C)
Time Constant: Less than 0.5 seconds typical in liquid. Less than 2.5 seconds full reading.
Accuracy: ±0.9°F (±0.5°C) from 32 to 212°F (0 to 100°C)
Select probe and add to cart


Optional Type K Thermocouple Probes

  • Hundreds of probes to choose from
  • Penetration, surface, high temp, wire, and more
  • Select coiled or flat cables with optional extended cable lengths
Probe


more info
Select Category to View Probes

probe
General Purpose

probe
High Temp

probe
Penetration


probe
Surface

probe
Wire

probe
Probe Accessories



Our Company