Need a bath for calibrating temperature devices and don’t have a budget of $7K? Look no further. With a stability of ±0.01°C, these baths are perfect for routine calibration work at the temperatures you test most, 0°C and 100°C (32°F and 212°F), and at about half the price of a traditional metrology bath.

Select from four controller options to match your application. With the Programmable Controller (model 9112) you can store up to 10 programs with up to 50 step points, view a stability trend graphically, set high and low limits, and use an external control probe in a remote bath.

Using the Digital Controller (model 9102), you still get the same great stability and bath performance without the added programmability and remote probe. The microprocessor based digital controller allows dual readout of both set and actual temperatures and comes equipped with a built-in 5-speed pressure/suction pump.

With the Standard Controller (model 9106), stabilities of ±0.05°C are attainable with control up to 150°C. Three temperature setpoints can be programmed and recalled at the single touch of the front panel. The bright LED displays fluid temperature continuously with a quick touch of the set knob to display the current setpoint.

For low-cost, basic temperature control you’ll love the Analog Controller (model 912) option. With stability to ±0.2°C and upper range to 100°C, this bath makes a great incubator or sample prep bath.

The 9100 series baths are ideal for labs with tight working space requirements. They boast a 1 square foot footprint and quiet operation for all types of lab applications. Each model is equipped with redundant over-temperature and lo-liquid level protection.